High Vacuum Quick Disconnect with 1.0" ID (compatible with SpinTron-3,4,6). Material: 304 stainless steel. Use this component to install the SpinTron sputtering tool onto the baseplate (up to 1” thick) of a vacuum chamber. Drill a 1-3/8” diameter through-hole on the baseplate and mount the Quick Disconnect through this hole. Let the 1” OD tube of the SpinTron through the Quick Disconnect, and adjust the height of the SpinTron in the vacuum chamber. Tighten the Quick Disconnect to fix the position of the SpinTron. No special tools or welds are needed. Within 10 minutes, the installation can be conveniently completed.
See
our Shipping
Policies